The anticorrosion system ANTICOR Plast has been introduced in 2004 as an original product
of ANTICOR Company. It is A30 class coating which fulfilling the requirements of PN-EN12068 standard. Thanks to high quality of components and easy technology of application and also many important exploitation properties this system was approved by users in Poland and many countries
of Central Europe.

ANTICOR Plast system is used in many industries and branches. These materials are mainly used
in the gas industry, waterworks, petrochemical, air conditioning, shipbuilding and construction industries. They are used in the construction under and above the ground and also under water. This system is particularly recommended for fitting, flange and valve insulation where gasket changing necessity frequently occurred and anticorrosion coating should be removed. The part of anticorrosion mastic is recovered in this case.
Anticor 732-08


ANTICOR 732-08 mechanical corrosion protection tape is used for two-layer corrosion protection system.

Backing:
• Medium density PE film

Adhesive:
• Synthetic rubber

TECHNICAL DATA
• Colour: Black
• Total thickness: 0.19 mm.
• Elongation: > 160 %.
• Dielectric strength: 48 kV/mm.
• Operating temperature: -20°C up to + 80°C.

APPLICATION :
• As a mechanical corrosion protection applied on the basic protection layer of ANTICOR PLAST 701-40 tape.
• Useful especially for manual application on: T-joints, curve sections of pipe, flanges, and muff joints, valves
and fittings.

FEATURES & ADVANTAGES:
• It fits perfectly to the shape of the surface.
• It ensures minimal steam permeability.
• It has excellent electric strength.

USAGE:
• Apply on the basic corrosion protection layer of ANTICOR PLAST 701-40 tape.
• Wrap the tape around the surface spirally overlapping 50% of the tape and stretch narrowing to 95% of the original tape width.


Copyright by ANTICOR Sp. z o.o.
# Go top