The anticorrosion system ANTICOR Plast has been introduced in 2004 as an original product
of ANTICOR Company. It is A30 class coating which fulfilling the requirements of PN-EN12068 standard. Thanks to high quality of components and easy technology of application and also many important exploitation properties this system was approved by users in Poland and many countries
of Central Europe.

ANTICOR Plast system is used in many industries and branches. These materials are mainly used
in the gas industry, waterworks, petrochemical, air conditioning, shipbuilding and construction industries. They are used in the construction under and above the ground and also under water. This system is particularly recommended for fitting, flange and valve insulation where gasket changing necessity frequently occurred and anticorrosion coating should be removed. The part of anticorrosion mastic is recovered in this case.
Anticor Plast 745

ANTICOR Plast 745 mastic is manufactured basing on deeply refined mineral oil, hydrocarbons thickener with corrosion and rust inhibitors and adhesion-improving components. It does not contain hazardous substances for human health and for environment. It does not dissolve in water.

• Colour: Sahara
• Density at 20oC: 1,2 ÷ 1,4 kg/dm3.
• Flash-point: 200oC.
• Operating temperature: -34oC do +30oC.

It is used for surface irregularity filling, for irregular profile and dimension levelling and smoothing
in case of two - layer isolation system: ANTICOR PLAST 701-40 and ANTICOR PLAST 730-08, which is applied
on socket and flange joints, pipe joints, fittings and also as a protection of underground installations placed in wells.

• Easy to apply
• It contains corrosion inhibitors and adhesion improving components.
• It does not contain harmful substances for human health and for environment.


• Apply with trowel on surface cleaned from contaminants, dust, rust and moisture

Copyright by ANTICOR Sp. z o.o.
# Go top